prof. dr. sc. Zoran Jurković

Projekt broj 0069021 - "Modeliranje i simulacija procesa primjenom genetskog i stohastičkog algoritma" / Modelling and simulation of processes using genetic and stochastic algorithms

Projekt broj 069-0692976-1738 - "Istraživanje visokoproduktivnih obrada na inteligentnim obradnim sustavima".

"Istraživanje visokoproduktivne obrade odvajanjem čestica na inteligentnim obradnim sustavima" - istraživačka potpora Sveučilišta u Rijeci

istraživačka potpora Sveučilišta u Rijeci, uniri-technic-18-100-1235, "Primjena tehnologija inkrementalnog oblikovanja u individualnoj proizvodnji izradaka iz naprednih polimernih materijala" / Application of incremental forming technologies in individual production of parts from advanced polymer materials

istraživačka potpora Sveučilišta u Rijeci, uniri-technic-18-223-6162, "Napredne metode simulacije operativne pripreme planiranja proizvodnje" / Advanced methods of simulating the operational preparation of production planning

Popis znanstvenoistraživačkih projekata u suradnji s inozemnim partnerima / List of scientific research projects in collaboration with foreign partners:

"Modeliranje procesa dubokog vučenja eksplozijom primjenom genetskih i  stohastičkih metoda", Federalno ministarstvo obrazovanja i nauke BiH.

"Mjerenje deformacija alata i analiza strukture materijala u procesu dubokog vučenja eksplozijom", Federalno ministarstvo obrazovanja i nauke BiH.

"Modeliranje i optimizacija alata primjenom informacijskih tehnologija virtualne proizvodnje s eksperimentalnom verifikacijom", bilateralni znanstveno-istraživački projekt Hrvatska-Srbija / Modelling and optimization of tool by application of information technologies of virtual manufacturing with experimental verification, bilateral scientific research project Croatia - Serbia

"Reinženjering proizvodnih poduzeća u cilju stjecanja konkurentske sposobnosti", Federalno ministarstvo obrazovanja i nauke Bosne i Hercegovine

"Razvoj naprednih metoda za modeliranje i optimizaciju obradnih postupaka i sustava", bilateralni znanstveno-istraživački projekt Hrvatska-Slovenija / Development of advanced methods for modelling and optimization of manufacturing processes and systems, bilateral scientific research project Croatia - Slovenia

"Eksperimentalno istraživanje profilnog oblikovanja lima u cilju modeliranja i optimizacije tehnološkog procesa i modernizacije proizvodnog sustava", Federalno ministarstvo obrazovanja i nauke Bosne i Hercegovine

voditelj projekta na Sveučilištu u Rijeci kao jedan od partnera unutar međunarodnog konzorcija,WBC Mreža korisnika virtualne proizvodnje – potpora integraciji trokuta znanja, br. 144684-TEMPUS-2008-RS-JPHES, http://www.wbc-vmnet.kg.ac.rs/, (voditelj: izv. prof. dr. sc. Vesna Mandić, dipl. ing.), Europska komisija - Tempus IV. 

coordinator on University of Rijeka as one of partner institution on TEMPUS project, entitled: WBC Virtual Manufacturing Network - Fostering an Integration of the Knowledge Triangle, Contract no. 144684-TEMPUS-2008-RS-JPHES. http://www.wbc-vmnet.kg.ac.rs/, (leader: Assoc. Prof. Vesna Mandić).This project has been funded with support from European Commission, within TEMPUS IV programme.

• Liverić, L., Iljkić, D., Jurković, Z., Čatipović, N., Nuckowski P., Bialas, O.: »Corrosion Behaviour of Annealed 42CrMo4 Steel«. Materials and technology, Vol. 57, No. 2, 2023, pp. 111-117, ISSN 1580-2949, Inštitut za kovinske materiale in tehnologije doi:10.17222/mit.2022.624
• Janeš, G., Ištoković, D., Jurković, Z., Perinić, M.: »Application of Modified Steady-State Genetic Algorithm for Batch Sizing and Scheduling Problem with Limited Buffers«, Applied Sciences, Vol. 12, No. 22, 11512, 2022, ISSN 2076-3417, MDPI Basel, doi: 10.3390/app122211512
• Brlić, T., Rešković, S., Jurković, Z., Janeš, G.: »Mathematical Modeling of Influence Parameters During Formation and Propagation of the Lüders Bands«, Facta Universitatis Series: Mechanical Engineering, Vol. 18, No. 4, 2020, pp. 595-610, ISSN 0354-2025, University of Niš, doi: 10.22190/FUME200416041B
• Sterpin Valic, G., Cukor, G., Jurkovic, Z., Brezocnik, M.: »Multi-Criteria Optimization of Turning of Martensitic Stainless Steel for Sustainability«, International Journal of Simulation Modelling, Vol. 18, No. 4, 2019, pp. 632-642, ISSN 1726-4529, DAAAM International Vienna, Vienna. doi: 10.2507/IJSIMM18(4)495
• Babič, M., Prsić, D., Jurković, Z., Lajos, B., Ipšić-Martinčić, S., Lhotská, L., Ocampo, L.: » A Novel Method for Statistical Pattern Recognition Using the Network Theory and a New Hybrid System of Machine Learning« Materiali in tehnologije / Materials and technology, Vol. 53, No. 1, 2019, pp. 95-100, ISSN 1580-2949, Institute of Metals and Technology, Ljubljana. doi:10.17222/mit.2018.116
• Kostadin, T., Cukor, G., Jurkovic, Z.: »Influence of Cutting Fluids on the Corrosion Resistance of X20Cr13 Martensitic Stainless Steel«, International Journal of Electrochemical Science, Vol. 13, No. 12, 2018, pp. 11986-11999, ISSN 1452-3981, ESG, Belgrade. doi: 10.20964/2018.12.81
• Jurkovic, Z., Cukor, G., Brezocnik, M., Brajkovic, T.: »A comparison of machine learning methods for cutting parameters prediction in high speed turning process«, Journal of Intelligent Manufacturing, Vol. 29, No. 8, 2018, pp. 1683-1693, ISSN 0956-5515, Springer US. doi: 10.1007/s10845-016-1206-1
• Jurkovic, M., Jurkovic, Z., Buljan, S., Obad, M.: »An experimental and modelling approach for improving utilization rate of the cold roll forming production line« Advances in Production Engineering & Management, Vol. 13, No. 1, 2018, pp. 57-68, ISSN 1854-6250, Production Engineering Institute (PEI), Faculty of Mechanical Engineering University of Maribor, Maribor. doi:10.14743/apem2018.1.273
• Botak, Z, Balič, J., Jurković, Z.: »Optimising external turning tool choice using AHP and ELECTRE II methods«, Tehnički vjesnik/Technical Gazette, Vol. 24, No. 5, 2017, pp. 1355-1360, ISSN 1330-3651, Strojarski fakultet u Slavonskom Brodu, Elektrotehnički fakultet u Osijeku, Građevinski fakultet u Osijeku, Slavonski Brod. doi: 10.17559/TV-20160127122457
• Janeš, G., Perinić, M., Jurković, Z.: »Applying Improved Genetic Algorithm for Solving Job Shop Scheduling Problems«, Tehnički vjesnik/Technical Gazette, Vol. 24, No. 4, 2017, pp. 1243-1247, ISSN 1330-3651, Strojarski fakultet u Slavonskom Brodu, Elektrotehnički fakultet u Osijeku, Građevinski fakultet u Osijeku, Slavonski Brod. doi: 10.17559/TV-20150527133957
• Savićević, S., Avdušinović, H., Gigović-Gekić, A., Jurković, Z., Vukčević, M., Janjić, M.: »Influence oft he Austempering Temperature on the Tensile Strength of the Austempered ductile iron (ADI) Samples«, Metalurgija/Metallurgy, Vol. 56, No. 1-2, 2017, pp. 149-152, ISSN 0543-5846, Hrvatsko metalurško društvo, Zagreb.
• Janjić, M., Avdušinović, H., Jurković, Z., Bikić, F., Savićević, S.: »Influence of Austempering Heat Treatment on Mechanical and Corrosion Properties of Ductile Iron Samples«, Metalurgija/Metallurgy, Vol. 55, No. 3, 2016, pp. 325-328, ISSN 0543-5846, Hrvatsko metalurško društvo, Zagreb.
• Luptáková, N., Dymáček, P., Pešlová, F., Jurković, Z., Barborák, O., Stodola, J.: »Impact of Residual Elements on Zinc Quality in the Production of Zinc Oxide«, Metalurgija/Metallurgy, Vol. 55, No. 3, 2016, pp. 407-410, ISSN 0543-5846, Hrvatsko metalurško društvo, Zagreb.
• Janjić, M., Vukčević, M., Jurković, Z., Šibalić, N., Savićević, S.: »Physical Modelling and Numerical Finite Element Method (FEM) Simulation of Forging in Open Die of Alloy AlMgSi0,5«, Metalurgija/Metallurgy, Vol. 55, No. 2, 2016, pp. 181-184, ISSN 0543-5846, Hrvatsko metalurško društvo, Zagreb.
• Puh, F., Jurković, Z., Perinić, M., Brezočnik, M., Buljan, S.: »Optimization of Machining Parameters for Turning Operation with Multiple Quality Characteristics using Grey Relational Analysis«, Tehnički vjesnik/Technical Gazette, Vol. 23, No. 2, 2016, pp. 377-382, ISSN 1330-3651, Strojarski fakultet u Slavonskom Brodu, Elektrotehnički fakultet u Osijeku, Građevinski fakultet u Osijeku, Slavonski Brod. doi: 10.17559/TV-20150526131717
• Jurković, M., Jurković, Z., Obad, M., Buljan, S., Mustafić, E.: »An Investigation of the Force and Torque at Profile Sheet Metal Rolling – Input Data for the Production System Reengineering«, Tehnički vjesnik/Technical Gazette, Vol. 22, No. 4, 2015, pp. 1029-1034, ISSN 1330-3651, Strojarski fakultet u Slavonskom Brodu, Elektrotehnički fakultet u Osijeku, Građevinski fakultet u Osijeku, Slavonski Brod. doi: 10.17559/TV-20150310092726
• Hrelja, M., Klančnik, S., Irgolič, T., Paulič, M., Jurković, Z., Balič, J., Brezočnik, M.: »Particle swarm optimization approach for modelling a turning process«, Advances in Production Engineering & Management, Vol. 9, No. 1, 2014, pp. 21-30, ISSN 1854-6250, Production Engineering Institute (PEI), Faculty of Mechanical Engineering University of Maribor, Maribor. doi:10.14743/apem2014.1.173
• Kramar, D., Sekulić, M., Jurković, Z., Kopač, J.: »The Machinability of Nickel-Based Alloys in High-Pressure Jet Assisted (HPJA) Turning«, Metalurgija/Metallurgy, Vol. 52, No. 4, 2013, pp. 512-514, ISSN 0543-5846, Hrvatsko metalurško društvo, Zagreb.
• Mandić, V., Erić, D., Adamović, D., Janjić, M., Jurković, Z., Babić, Ž., Ćosić, P.: »Concurrent Engineering Based on Virtual Manufacturing«, Tehnički vjesnik/Technical Gazette, Vol. 19, No. 4, 2012, pp. 885-892, ISSN 1330-3651, Strojarski fakultet u Slavonskom Brodu, Elektrotehnički fakultet u Osijeku, Građevinski fakultet u Osijeku, Slavonski Brod.
• Puh, F., Šegota, T., Jurković, Z.: »Optimization of Hard Turning Process Parameters with PCBN Tool Based on the Taguchi Method«, Tehnički vjesnik/Technical Gazette, Vol. 19, No. 2, 2012, pp. 415-419, ISSN 1330-3651, Strojarski fakultet u Slavonskom Brodu, Elektrotehnički fakultet u Osijeku, Građevinski fakultet u Osijeku, Slavonski Brod.
• Stanković, I., Perinić, M., Jurković, Z., Mandić, V., Maričić, S.: »Usage of Neural Network for the Prediction of Surface Roughness after the Roller Burnishing«, Metalurgija/Metallurgy, Vol. 51, No. 2, 2012, pp. 207-210, ISSN 0543-5846, Hrvatsko metalurško društvo, Zagreb.
• Cukor, G., Jurković, Z., Sekulić, M.: »Rotatable Central Composite Design of Experiments versus Taguchi Method in the Optimization of Turning«, Metalurgija/Metallurgy, Vol. 50, No. 1, 2011, pp. 17-20, ISSN 0543-5846, Hrvatsko metalurško društvo (HMD), Zagreb.
• Mandić, V., Adamović, D., Jurković, Z., Stefanović, M., Živković, M., Ranđelović, S., Marinković, T.: »Numerical FE Modelling of the Ironing Process of Aluminium Alloy and its Experimental Verification«, Transactions of FAMENA, Vol. 34, No. 4, 2010, pp. 59-69, ISSN 1333-1124, Fakultet strojarstva i brodogradnje u Zagrebu, Zagreb.
• Adamović, D., Mandić, V., Jurković, Z., Grizelj, B., Stefanović, M., Marinković, T., Aleksandrović, S.: »An Experimental Modelling and Numerical FE Analysis of Steel-Strip Ironing Process«, Tehnički vjesnik/Technical Gazette, Vol. 17, No. 4, 2010, pp. 435-444, ISSN 1330-3651, Strojarski fakultet u Slavonskom Brodu, Elektrotehnički fakultet u Osijeku, Građevinski fakultet u Osijeku, Slavonski Brod.
• Jurković, Z., Cukor, G., Andrejčak, I.: »Improving the Surface Roughness at Longitudinal Turning Using the Different Optimization Methods«, Tehnički vjesnik/Technical Gazette, Vol. 17, No. 4, 2010, pp. 397-402, ISSN 1330-3651, Strojarski fakultet u Slavonskom Brodu, Elektrotehnički fakultet u Osijeku, Građevinski fakultet u Osijeku, Slavonski Brod.
• Sekulić, M., Jurković, Z., Hadžistević, M., Gostimirović, M.: »The  Influence of Mechanical Properties of Workpiece Material on the Main Cutting Force in Face Milling«, Metalurgija/Metallurgy, Vol. 49, No. 4, 2010, pp. 339-342, ISSN 0543-5846, Hrvatsko metalurško društvo (HMD), Zagreb.
• Jurković, Z., Brezočnik, M., Grizelj, B., Mandić, V.: »Optimization of Extrusion Process by Genetic Algorithms and Conventional Techniques«, Tehnički vjesnik/Technical Gazette, Vol. 16, No. 4, 2009, pp. 27-33, ISSN 1330-3651, Strojarski fakultet u Slavonskom Brodu, Elektrotehnički fakultet u Osijeku, Građevinski fakultet u Osijeku, Slavonski Brod.
• Jurković, M., Jurković, Z., Mahmić, M.: »An Analysis and Modelling of Spinning Process without Wall-Thickness Reduction«, Metalurgija/Metallurgy, Vol. 45, No. 4, 2006, pp. 307-312, ISSN 0543-5846, Hrvatsko metalurško društvo, Zagreb
• Jurković, Z., Jurković, M.: »Modelling and Optimization of the Tool Geometry for Deep Drawing of Sheet Metal«, Metalurgija/Metallurgy, Vol. 39, No. 4, 2000, pp. 231-236, ISSN 0543-5846, Hrvatsko metalurško društvo, Zagreb.
• Jurković, M., Hriešik, A., Jurković, Z., Vitez, I.: »Modelling of Tribological Parameters in Process of Cold Drawing and Selection of Optimal Lubricators«, Metalurgija/ Metallurgy, Vol. 37, No. 3, 1998, pp. 159-163, ISSN 0543-5846, Hrvatsko metalurško društvo, Zagreb.
• Jurković, M., Cukor, G., Jurković, Z.: »Stohastičko modeliranje i optimizacija rezne geometrije alata za tokarenje«, Strojarstvo, Vol. 40, No. 1-2, 1998, pp. 17-29, ISSN 0562-1887, Hrvatski strojarski i brodograđevni inženjerski savez, Zagreb.

procesi obrade odvajanjem čestica i deformiranjem, modeliranje i optimizacija procesa obrade; alatni strojevi, planiranje eksperimenta, primjena evolucijskih algoritama i drugih na prirodi baziranih algoritama, efikasnost procesa, ušteda energije u procesima obrade / metal cutting and metal forming processes, modelling and optimization of processes, machine tools, DoE, application of evolutionary algorithms and other natural based algorithms, process efficiency, energy savings in the production processes.