Laboratory for Automation and Robotics

Head Assoc. Prof. Neven Bulić person.image.file.alt
Telephone
+385 51 651413, int. 2413 (Office)
Location
2-57

 

Researchers:

Prof. Zlatan Car

Assoc. Prof. Neven Bulić

assistant Nikola Anđelić

assistant Sebastijan Blažević

assistant Dominik Cikač

assistant Nikola Lopac

assistant Ivan Lorencin

assistant Nikola Turk

Sandi Baressi Šegota

Jelena Musulin

Daniel Štifanić

Laboratory equipment

Lab1.jpgLaboratory equipment for students

 

 

ABB IRB 120 Robotski Manipulator.jpgABB IRB 120 robotic manipulator

 

 

festo industrijska kamera.jpgFesto industrial camera
Lab2.jpgIndustrial control system for electric motor drive

 

 

ABB IRB 2400 Robotski Manipulator - donacija od Vargon doo.jpgABB IRB 2400 robotic manipulator - donation from Vargon d.o.o.

 

 

kontrolna jedinica ABB IRB 120.jpgABB IRB 120 control unit

 

 

Publications

Chapters in books

Sumina, Damir; Bulić, Neven; Mirošević, Marija, Mišković, Mato
Synchronous Generator Advanced Control Strategies Simulation. // MATLAB - A Ubiquitous Tool for the Practical Engineer / Clara M. Ionescu (ur.).
Rijeka: In-Tech, 2011. str. 179-196

 

Haračić, Senad; Barišić, Branimir; Car, Zlatan
Example of 3D Measurements and Analysis the Optical Eyepiece Holder. // Development of Mechanical Engineering as a Tool for Enterprise Logistic Progress / Legutko, Stanislaw (ur.).
Poznan, Poland: Poznan University of Technology, 2006. str. 285-291

 

Journal papers

Zlatan Car, Sandi Baressi Šegota , Nikola Anđelić, Ivan Lorencin, Vedran Mrzljak
Modeling the Spread of COVID-19 Infection Using a Multilayer Perceptron.  // Computational and Mathematical Methods in Medicine, 2020 (2020), 5714714, 10 doi:10.1155/2020/5714714 (međunarodna recenzija, članak, znanstveni)

 

Baressi Šegota, Sandi; Anđelić, Nikola; Lorencin, Ivan; Saga, Milan; Car, Zlatan
Path planning optimization of six-degree-of-freedom robotic manipulators using evolutionary algorithms.  // International journal of advanced robotic systems, 17 (2020), 2;  1-16 doi:10.1177/1729881420908076 (međunarodna recenzija, članak, znanstveni)

 

Lorencin, Ivan; Anđelić, Nikola; Španjol, Josip; Car, Zlatan
Using multi-layer perceptron with Laplacian edge detector for bladder cancer diagnosis.  // Artificial Intelligence in Medicine, 102 (2020), 101746, 16 doi:10.1016/j.artmed.2019.101746 (međunarodna recenzija, članak, znanstveni)

 

Lorencin, Ivan; Anđelić, Nikola; Mrzljak, Vedran; Car, Zlatan
Multilayer Perceptron approach to Condition- Based Maintenance of Marine CODLAG Propulsion System Components.  // Pomorstvo : scientific journal of maritime research, 33 (2020), 2;  181-190 doi:10.31217/p.33.2.8 (međunarodna recenzija, članak, znanstveni)

 

Kocijel, Lino; Poljak, Igor; Mrzljak, Vedran; Car, Zlatan
Energy Loss Analysis at the Gland Seals of a Marine Turbo-Generator Steam Turbine.  // Tehnički glasnik - Technical Journal, Vol. 14 (2020), No. 1;  19-26 doi:10.31803/tg-20191031094436 (međunarodna recenzija, članak, znanstveni)

 

Medica-Viola, Vedran; Mrzljak, Vedran; Anđelić, Nikola; Jelić, Maro. Analysis of Low-Power Steam Turbine With One Extraction for Marine Applications // Naše more : znanstveni časopis za more i pomorstvo, 67 (2020), 2; 87-95 doi:10.17818/NM/2020/2.1 (međunarodna recenzija, članak, znanstveni)

 

Lopac, Nikola; Šegon, Gordan; Bulić, Neven
Application of a model-based design tool X2C in induction machine vector control.  // Engineering review (Technical Faculty University of Rijeka), 39 (2019), 1;  90-104 doi:10.30765/er.39.1.10 (međunarodna recenzija, članak, znanstveni)

 

Lopac, Nikola; Bulić, Neven; Vrkić, Nikša
Sliding Mode Observer-Based Load Angle Estimation for Salient-Pole Wound Rotor Synchronous Generators.  // Energies, 12 (2019), 9; 1609, 22 doi:10.3390/en12091609 (međunarodna recenzija, članak, znanstveni)

 

Turk, Nikola; Bulic, Neven; Gruber, Wolfgang
Nonlinear Control of a Bearingless Flux-Switching Slice Motor with Combined Winding System.  // IEEE/ASME Transactions on Mechatronics, 1 (2019),  1-1 doi:10.1109/tmech.2019.2950871 (međunarodna recenzija, članak, znanstveni)

 

Baressi Šegota, Sandi; Lorencin, Ivan; Ohkura, Kazuhiro; Car, Zlatan
On the Traveling Salesman Problem in Nautical Environments: an Evolutionary Computing Approach to Optimization of Tourist Route Paths in Medulin, Croatia.  // Pomorski zbornik, 57 (2019), 1;  71-87 doi:10.18048/2019.57.05. (međunarodna recenzija, članak, znanstveni)

 

Sandi Baressi Šegota, Ivan Lorencin, Jelena Musulin, Daniel Štifanić, Zlatan Car
Frigate Speed Estimation Using CODLAG PropulsionSystem Parameters and Multilayer PerceptronProcjena brzine fregate pomoću parametara CODLAGpogonskog sustava i višeslojnog perceptrona.  // Naše more : znanstveni časopis za more i pomorstvo, 67 (2020), 2;  117-125 doi:10.17818/NM/2020/2.4 (međunarodna recenzija, prethodno priopćenje, ostalo)

 

Wei, Yufei; Hiraga, Motoaki; Ohkura, Kazuhiro; Car, Zlatan
Autonomous task allocation by artificial evolution for robotic swarms in complex tasks.  // Artificial Life and Robotics, 24 (2019), 1;  127-134 doi:10.1007/s10015-018-0466-6 (međunarodna recenzija, članak, znanstveni)

 

Blažević, Sebastijan; Mrzljak, Vedran; Anđelić, Nikola; Car, Zlatan
Comparison of energy flow stream and isentropic method for steam turbine energy analysis.  // Acta Polytechnica, 59 (2019), 2;  109-125 doi:10.14311/AP.2019.59.0109 (međunarodna recenzija, članak, znanstveni)

 

Mrzljak, Vedran; Blecich, Paolo; Anđelić, Nikola; Lorencin, Ivan. Energy and Exergy Analyses of Forced Draft Fan for Marine Steam Propulsion System during Load Change // Journal of marine science and engineering, 7 (2019), 11; 381, 26 doi:10.3390/jmse7110381 (međunarodna recenzija, članak, znanstveni)

 

Baressi Šegota, Sandi; Anđelić, Nikola; Kudláček, Jan; Čep, Robert. Artificial neural network for predicting values of residuary resistance per unit weight of displacement // Pomorski zbornik, 57 (2019), 1; 9-22 doi:10.18048/2019.57.01. (međunarodna recenzija, članak, znanstveni)

 

Anđelić, Nikola; Car, Zlatan; Čanađija, Marko
NEMS Resonators for Detection of Chemical Warfare Agents Based on Graphene Sheet.  // Mathematical problems in engineering, 2019 (2019), 6451861, 23 doi:10.1155/2019/6451861 (međunarodna recenzija, članak, znanstveni)

 

Lorencin, Ivan; Anđelić, Nikola; Mrzljak, Vedran; Car, Zlatan
Exergy analysis of marine steam turbine labyrinth (gland) seals.  // Pomorstvo : scientific journal of maritime research, 33 (2019), 1;  76-83 doi:10.31217/p.33.1.8 (međunarodna recenzija, članak, znanstveni)

 

Wei, Yufei; Nie, Xiaotong; Hiraga, Motoaki; Ohkura, Kazuhiro; Car, Zlatan
Developing End-to-End Control Policies for Robotic Swarms Using Deep Q-learning.  // Journal of Advanced Computational Intelligence and Intelligent Informatics, 23 (2019), 5;  920-927 doi:10.20965/jaciii.2019.p0920 (međunarodna recenzija, članak, znanstveni)

 

Lorencin, Ivan; Anđelić, Nikola; Mrzljak, Vedran; Car, Zlatan
Marine Objects Recognition Using Convolutional Neural Networks.  // NAŠE MORE : znanstveno-stručni časopis za more i pomorstvo, 66 (2019), 3;  112-119 doi:10.17818/NM/2019/3.3 (međunarodna recenzija, članak, znanstveni)

 

Lorencin, Ivan; Anđelić, Nikola; Mrzljak, Vedran; Car, Zlatan
Genetic Algorithm Approach to Design of Multi- Layer Perceptron for Combined Cycle Power Plant Electrical Power Output Estimation.  // Energies, 12 (2019), 22; 4352, 26 doi:10.3390/en12224352 (međunarodna recenzija, članak, znanstveni)

 

Lorencin, Ivan; Anđelić, Nikola; Španjol, Josip; Car, Zlatan
Using multi-layer perceptron with Laplacian edge detector for bladder cancer diagnosis.  // Artificial intelligence in medicine, 102 (2019),  1-16 doi:10.1016/j.artmed.2019.101746 (međunarodna recenzija, članak, znanstveni)

 

Mrzljak, Vedran; Anđelić, Nikola; Lorencin, Ivan; Car, Zlatan
Analysis of Gas Turbine Operation before and after Major Maintenance.  // Pomorski zbornik, 57 (2019), 1;  57-70 doi:10.18048/2019.57.04. (međunarodna recenzija, članak, znanstveni)

 

Jurdana, Vedran; Bulic, Neven; Gruber, Wolfgang
Topology Choice and Optimization of a Bearingless Flux-Switching Motor with a Combined Winding Set.  // Machines, 6 (2018), 4; 57, 16 doi:10.3390/machines6040057 (međunarodna recenzija, članak, ostalo)

 

Puskaric, Miroslav; Bulic, Neven; Car, Zlatan
Implementation of Inductive Proximity Sensors in Active Magnetic Bearings.  // Tehnički vjesnik, 25 (2018), 6;  1638-1641 doi:10.17559/TV-20170515084609 (međunarodna recenzija, članak, znanstveni)

 

Puškarić, Miroslav; Car, Zlatan; Bulić, Neven
Magnetic Bearing Control System Based on PI and PID Controllers.  // Tehnički vjesnik, 25 (2018), 1;  136-140 doi:10.17559/TV-20160726112308 (domaća recenzija, članak, znanstveni)

 

Kranjec, Bojan; Sladic, Sasa; Giernacki, Wojciech; Bulic, Neven
PV System Design and Flight Efficiency Considerations for Fixed-Wing Radio-Controlled Aircraft—A Case Study.  // Energies, 11 (2018), 10;  1-12 doi:10.3390/en11102648 (međunarodna recenzija, članak, znanstveni)

 

Sladić, Sasa; Poljak, Alen; Bulić, Neven
Towards the new energy storage system for conventional cars.  // Engineering review, 38 (2018), 3;  261-267 (međunarodna recenzija, članak, znanstveni)

 

Bulic, Neven; Šušnjic, Livio
Eddy current sensor simulation.  // COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, 36 (2017), 3;  619-632 doi:10.1108/compel-09-2016-0415 (međunarodna recenzija, članak, znanstveni)

 

Kobal, Marko; Car, Zlatan; Ojsteršek, Milan
MPI applications' performances in native vs. virtualized environments using InfiniBand IPoIB virtualization and live migration.  // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 22 (2015), 6;  1495-1503 doi:10.17559/TV-20140819115232 (međunarodna recenzija, članak, znanstveni)

 

Ogrizović, Dario; Car, Zlatan; Kovačić, Božidar
Scientific Applications in Cloud Computing.  // The IPSI BGD Transactions on Advanced Research, 10 (2014), 1;  27-33 (podatak o recenziji nije dostupan, članak, znanstveni)

 

Štimac, Goranka; Braut, Sanjin; Bulić, Neven; Žigulić, Roberto
Modeling and experimental verification of a flexible rotor/AMB system.  // COMPEL : The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 32 (2013), 4;  1244-1254 (međunarodna recenzija, članak, znanstveni)

 

Čep, Robert; Janásek, Adam; Čepová, Lenka; Petrů, Jana; Hlavatý, Ivo; Car, Zlatan; Hatala, Michal
Experimental Testing of Exchangeable Cutting Inserts Cutting Ability.  // Tehnicki Vjesnik-Technical Gazette, 20 (2013), 1;  21-26 (međunarodna recenzija, članak, znanstveni)

 

Tomić, Draško; Ogrizović, Dario; Car, Zlatan
Cloud Solutions for High Performance Computing: Oxymoron or Realm?.  // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 20 (2013), 1;  177-182 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

 

Drasnar, Petr; Kudláček, Jan; Pepelnjak, Tomaž; Car, Zlatan; Pazderova, Martina
Zinc-Polytetrafluoroethylene (Zn-PTFE) Composite Coating with Exploitable Tribological Properties.  // Journal of Engineering Technology, 30 (2013), 1;  30-36 doi:http://connection.ebscohost.com/c/articles/87688065/zinc-polytetrafluoroethylene-zn-ptfe-composite-coating-exploitable-tribological-properties (podatak o recenziji nije dostupan, članak, znanstveni)

 

Sumina, Damir; Bulić, Neven; Vražić, Mario
Load Angle Control of a Synchronous Generator.  // Przeglad Elektrotechniczny, 88 (2012), 3a/2012;  225-231 (međunarodna recenzija, članak, znanstveni)

 

Sumina, Damir; Bulić, Neven; Mišković, Mato
Application of a DSP-based control system in a course in synchronous machines and excitation systems.  // International journal of electrical engineering education, 49 (2012), 3;  334-348 doi:10.7227/IJEEE.49.3.12 (međunarodna recenzija, članak, znanstveni)

 

Kršulja, Marko; Mijić, Saša; Barišić, Branimir; Car, Zlatan
Design and Planning of Clamping Work-holder Station for Sheet Metal Part of Car Body.  // Výrobné inžinierstvo, The journal Manufacturing and Industrial Engineering, 11 (2012), 2;  38-43 (podatak o recenziji nije dostupan, članak, znanstveni)

 

Plančak, Miroslav; Movrin, Dejan; Vilotić, Dragiša; Car, Zlatan; Ivanišević, Aljoša; Kačmarcik, Igor; 
An analysis of non-axisymmetric backward extrusion.  // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 4;  953-957 doi:http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=137744 (međunarodna recenzija, članak, znanstveni)

 

Kršulja, Marko; Car, Zlatan; Radelja, Hrvoje
Behaviour of X5 CrNiMo 17-12-2 Material During Deep Drawing Process.  // METALURGIJA, 51 (2012), 2;  203-206 (međunarodna recenzija, članak, znanstveni)

 

Plančak, Miroslav; Car, Zlatan; Kršulja, Marko; Vilotić, Dragiša; Kačmarcik, Igor; Movrin, Dejan
Possibilities to Measure Contact Friction in Bulk Metal Forming.  // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 4;  727-734 doi:http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=137660 (međunarodna recenzija, članak, znanstveni)

 

Sumina, Damir; Bulić, Neven; Skok, Srđan
Stabilization of the electromechanical oscillations of synchronous generator.  // Strojarstvo, 53 (2011), 3;  209-219 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

 

Mirošević, Marija; Sumina, Damir; Bulić, Neven
Impact of induction motor starting on ship power network.  // International Review of Electrical Engineering, 6 (2011), 1;  186-197 (međunarodna recenzija, članak, znanstveni)

 

Sumina, Damir; Bulić, Neven; Mišković, Mato
Parameter tuning of power system stabilizer using eigenvalue sensitivity.  // Electric power systems research, 81 (2011), 12;  2171-2177 doi:10.1016/j.epsr.2011.07.016 (međunarodna recenzija, članak, znanstveni)

 

Plančak, Miroslav; Car, Zlatan; Vilotić, Dragiša; Movrin, Dejan; Kršulja, Marko
Upsetting of Bimetallic Components in Closed Die.  // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 31 (2011), 2;  105-109 (međunarodna recenzija, članak, znanstveni)

 

Lazanja, Matej; Barišić, Branimir; Car, Zlatan; Plančak, Miroslav
Accuracy Inspection of a Milling Machine with Ballbar System.  // Journal ''CA Systems in production process Planning'', 12 (2011), 1;  79-82 (podatak o recenziji nije dostupan, članak, znanstveni)

 

Stanković, Igor; Car, Zlatan, Barišić, Branimir
Comparative simulations of the heavy machining production system.  // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 31 (2011), 1;  1-11 (međunarodna recenzija, članak, znanstveni)

 

Mirošević, Marija; Sumina, Damir; Bulić, Neven
Influence of Time Gap between Impact Loads on Torsional Dynamics of Generator Units.  // International Review of Electrical Engineering, 5 (2010), 3;  1012-1021 (međunarodna recenzija, članak, znanstveni)

 

Bulić, Neven; Sumina Damir; Mišković, Mato
A Comparison of Advanced Control Structures for Synchronous Generator Excitation Control.  // International Review of Electrical Engineering, 5 (2010), 2;  473-480 (međunarodna recenzija, članak, znanstveni)

 

Bulić, Neven; Sumina Damir; Mišković, Mato
On-Line Synchronous Generator Stability Limit Determination.  // International Review of Electrical Engineering, 5 (2010), 1;  90-98 (međunarodna recenzija, članak, znanstveni)

 

Sumina, Damir; Bulić, Neven; Erceg, Igor
Three-dimensional power system stabilizer.  // Electric power systems research, 80 (2010), 7;  886-892 doi:10.1016/j.epsr.2009.12.014 (međunarodna recenzija, članak, znanstveni)


Sumina, Damir; Bulić, Neven; Švigir, Nikola
Impact of Electromechanical Oscillations on the Synchronous Generator Stability.  // Transactions of FAMENA, 33 (2009), 4;  41-52 (međunarodna recenzija, članak, znanstveni)

 

Car, Zlatan; Barišić, Branimir; Ikonić, Milan
GA Based CNC Turning Center Exploitation Process Parameters Optimization.  // Metalurgija, 48 (2009), 1;  47-50 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

 

Car, Zlatan; Ohkura, Kazuhiro; Barišić, Branimir
Application of Multi-Agent Technology and Heterarhical Architecture for Production Scheduling.  // Engineering review : znanstveni Časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 29 (2009), 1;  1-10 (podatak o recenziji nije dostupan, članak, znanstveni)

 

Car, Zlatan; Barišić, Branimir; Rucki, Miroslaw
Emergent Synthesis Based Multi-Objective Design of the Manufacturing System Shop-Floor.  // Strojniški vestnik, 55 (2009), 9;  523-530 (međunarodna recenzija, članak, znanstveni)

 

Maričić, Sven; Car, Zlatan; Ueda, Kanji
New Trends in Intelligent Manufacturing.  // Engineering review : znanstveni casopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 28 (2008), 2;  91-100 (podatak o recenziji nije dostupan, članak, znanstveni)

 

Barišić, Branimir; Car, Zlatan; Ikonić, Milan
Analysis of Different Modeling Approach at Determining of Backward Extrusion Force on AlCu5PbBi Material.  // Journal Metallurgy, 47 (2008), 4;  307-311 (međunarodna recenzija, članak, znanstveni)

 

Barišić, Branimir; Ungureanu, Mioriţa; Car, Zlatan
A Numerical Approach to the Establishment of a Sheet Metal Forming Process Technology.  // Annals of the University of Petroşani-Mechanical Engineering, 10 (2008), 1;  11-22 (podatak o recenziji nije dostupan, članak, znanstveni)

 

Barišić, Branimir; Ungureanu, Nicolae; Car, Zlatan
Investigation of Forming Force at Backward Extrusion Process on Different Aluminum Materials.  // Scientific Buleten Series C, XXII (2008), 1;  21-27 (podatak o recenziji nije dostupan, članak, znanstveni)

 

Car, Zlatan; Barišić, Branimir; Novak; Jozef
Multy Objective Evolutionary Based Scheduling.  // Jourrnal Manufacturing Engineering, 7 (2008), 2;  47-51 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

 

Barišić, Branimir; Rucki, Miroslaw; Car, Zlatan
Analysis of Digitizing and Traditional Measuring System at Surface Measurement of Lids.  // Key Engineering Materials, 381-382 (2008),  217-221 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

 

Car, Zlatan; Mikac, Tonči
Evolutionary approach for solving cell-formation problem in cell manufacturing.  // Advanced Engineering Informatics, 20 (2006), 3;  227-232. (https://www.bib.irb.hr/274636) (međunarodna recenzija, članak, znanstveni)

 

Ikonić, Milan; Barišić, Branimir; Car, Zlatan
Strain Energy Approach In Stamping Process Design.  // Journal of Manufacturing Engineering, 4 (2005), 1;  79-81 (podatak o recenziji nije dostupan, članak, znanstveni)

 

Car, Zlatan; Hatono, Itsuo; Ueda, Kanji
Reconfiguration of Manufacturing Systems Based on Virtual BMS.  // CIRP Journal of Manufacturing Systems, 33 (2004), 1;  15-24 (podatak o recenziji nije dostupan, članak, znanstveni)

 

Maričić, Sven; Barišić, Branimir; Car, Zlatan
Stochastic and Genetic Algorithm Comparison for Production Scheduling in a Flexible Manufacturing System.  // Engineering Review, 23 (2003),  31-44 (podatak o recenziji nije dostupan, članak, znanstveni)

 

Conference papers

Prpić-Oršić, Jasna; Mrzljak, Vedran; Baressi Šegota, Sandi; Lorencin, Ivan. Solver parameter influence on the results of multilayer perceptron for estimating power output of a combined cycle power plant // V INTERNATIONAL SCIENTIFIC CONFERENCE - SUMMER SESSION - INDUSTRY 4.0 - 2020 - PROCEEDINGS / Popov, Georgi ; Ovtcharova, Jivka (ur.). Sofia: Scientific technical union of mechanical engineering “Industry - 4.0”, 2020. str. 8-11 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Mrzljak, Vedran; Prpić-Oršić, Jasna; Lorencin, Ivan; Anđelić, Nikola. Thermodynamic analysis of three-cylinder steam turbine from combined cycle power plant // INTERNATIONAL CONFERENCE TECHNICAL SCIENCES. INDUSTRIAL MANAGEMENT 2020 - PROCEEDINGS / Angelov, Cyril (ur.). Sofia, Bulgaria: Scientific technical union of mechanical engineering “Industry-4.0”, 2020. str. 23-26 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Mrzljak, Vedran; Prpić-Oršić, Jasna; Medica- Viola, Vedran; Anđelić, Nikola. The change in energy flow streams for main marine propulsion steam turbine at different loads // XXVIII INTERNATIONAL SCIENTIFIC CONFERENCE - Trans & MOTAUTO 2020 - PROCEEDINGS / Kolev, Petar (ur.). Sofia: Scientific technical union of mechanical engineering “Industry - 4.0”, 2020. str. 8-11 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Braut, Sanjin; Žigulić, Roberto; Štimac Rončević, Goranka; Skoblar, Ante; Mirković, Mihajlo; Bulić, Neven
Rotor-stator partial rub detection based on Teager-Huang transform.  // Proceedings of the 10th International Conference on Rotor Dynamics – IFToMM / Lucchesi Cavalca, Katia ; Weber, Hans Ingo (ur.).
Rio de Janeiro: Springer, 2019. str. 252-264. (https://www.bib.irb.hr/959426) (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Franković, Dubravko; Bulić, Neven; Jakoplić, Alen; Rosanda, Boris
Reefer container power supply and supervision system onboard railway wagons.  // International Scientific Journal Innovations / Damianov, Dimitar (ur.).
Varna, 2019. str. 66-69 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Lorencin, Ivan; Barišić, Borna; Anđelić, Nikola; Španjol, Josip; Car, Zlatan
Comparison of edge detectors for urinary bladder cancer diagnostic.  // Proceedings of International Conference on Innovative Technologies IN-TECH 2019 / Car, Zlatan ; Kudláček, Jan (ur.).
Rijeka: Faculty of Engineering, University of Rijeka, 2019. str. 13-16. (https://www.bib.irb.hr/1031694) (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Mrzljak, Vedran; Car, Zlatan; Kudláček, Jan; Anđelić, Nikola; Lorencin, Ivan; Blažević, Sebastijan
Analysis of two methods for steam turbine developed power calculation in Industry 4.0.  // 10th International Technical Conference - Technological Forum 2019 - Proceedings / Kudláček, Jan (ur.).
Prague: Czech Technical University in Prague, 2019. str. 103-110. (https://www.bib.irb.hr/1024045) (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Mrzljak, Vedran; Orović, Josip; Poljak, Igor; Lorencin, Ivan The change in exergy efficiencies and losses of low-power steam turbine with steam extractions at three loads // Proceedings of International Conference on Innovative Technologies IN-TECH 2019 / Car, Zlatan ; Kudláček, Jan (ur.). Rijeka: Faculty of Engineering, University of Rijeka, 2019. str. 33-37 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Anđelić, Nikola; Lorencin, Ivan; Mrzljak, Vedran; Car, Zlatan
Friction modeling of robot manipulator joints.  // Proceedings of International Conference on Innovative Technologies IN-TECH 2019 / Car, Zlatan ; Kudláček, Jan (ur.).
Rijeka: Faculty of Engineering, University of Rijeka, 2019. str. 9-12. (https://www.bib.irb.hr/1031706) (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Lorencin, Ivan; Car, Zlatan; Kudláček, Jan; Mrzljak, Vedran; Anđelić, Nikola; Blažević, Sebastijan
Estimation of combined cycle power plant power output using multilayer perceptron variations.  // 10th International Technical Conference - Technological Forum 2019 - Proceedings / Kudláček, Jan (ur.).
Prague: Czech Technical University in Prague, 2019. str. 94-98. (https://www.bib.irb.hr/1024030) (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Anđelić, Nikola; Čanađija, Marko; Car, Zlatan
NEMS rezonator za detekciju kemijskog oružja za masovno uništenje temeljen na dvoslojnom grafenu.  // Hrvatsko Društvo za Mehaniku / Skozrit, Ivica ; Tonković, Zdenko ; Karšaj, Igor ; Lesičar, Tomislav (ur.).
Zagreb, 2019. str. 1-6 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

 

Anđelić, Nikola; Čanađija, Marko; Car, Zlatan
NEMS RESONATOR FOR DETECTION OF CHEMICAL WARFARE AGENTS BASED ON SINGLE LAYER GRAPHENE SHEET.  // Proceedings of International Conference on Innovative Technologies IN-TECH 2019 / Car, Zlatan ; Kudláček, Jan (ur.).
Rijeka: Faculty of Engineering, University of Rijeka, 2019. str. 5-8. (https://www.bib.irb.hr/1031698) (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Lopac, Nikola; Bulić, Neven
Estimation of the induction motor stator current frequency.  // Proceedings of International Conference on Innovative Technologies, IN-TECH 2018 / Car, Zlatan ; Kudláček Jan (ur.).
Zagreb: Faculty of Engineering, University of Rijeka, 2018. str. 183-186 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Lopac, Nikola; Bulić, Neven
Time-frequency representations of induction machine stator current.  // Book of Abstracts – My First Conference 2018 / Jardas, Mladen ; Glujić, Darko ; Vukelić, Goran ; Čanađija, Marko ; Travaš, Vanja (ur.).
Rijeka, 2018. str. 17-17 (ostalo, domaća recenzija, sažetak, znanstveni)

 

Bogović, Korino; Lorencin, Ivan; Anđelić, Nikola; Blažević, Sebastijan; Smolčić, Klara; Španjol, Josip; Car, Zlatan
ARTIFICIAL INTELLIGENCE-BASED METHOD FOR URINARY BLADDER CANCER DIAGNOSTIC.  // International Conference on Innovative Technologies, IN-TECH 2018 / Car, Zlatan ; Kudláček, Jan (ur.).
Zagreb: Faculty of Engineering, University of Rijeka, 2018. str. 51-53. (https://www.bib.irb.hr/953344) (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Brnić, Mateo; Čondrić, Emanuel; Blažević, Sebastijan; Anđelić, Nikola; Borović, Emanuel; Car, Zlatan
SEPSIS PREDICTION USING ARTIFICIAL INTELLIGENCE ALGORITHMS.  // International Conference on Innovative Technologies, IN-TECH 2018 / Car, Zlatan ; Kudláček, Jan (ur.).
Zagreb: Faculty of Engineering, University of Rijeka, 2018. str. 47-50. (https://www.bib.irb.hr/953341) (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Anđelić, Nikola; Blažević, Sebastijan; Car, Zlatan
TRAJECTROY PLANNING USING GENETIC ALGORITHM FOR THREE JOINTS ROBOT MANIPULATOR.  // International Conference on Innovative Technologies, IN-TECH 2018 / Car, Zlatan ; Kudláček, Jan (ur.).
Jaromer, Czech Republic: Faculty of Engineering, University of Rijeka, 2018. str. 25-27. (https://www.bib.irb.hr/953337) (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Mrzljak, Vedran; Blažević, Sebastijan; Anđelić, Nikola; Car, Zlatan
EXHAUST GAS EMISSIONS FROM TURBOCHARGED DIRECT INJECTION DIESEL ENGINE DURING THE FUEL MASS FLOW VARIATION.  // Proceedings of International Conference on Innovative Technologies, IN-TECH 2018 / Car, Zlatan ; Kudláček, Jan (ur.).
Zagreb: Faculty of Engineering, University of Rijeka, 2018. str. 35-38. (https://www.bib.irb.hr/953155) (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Kekelj, Matija; Bulic, Neven; Sucic, Victor
An FPGA implementation of the Goertzel algorithm in a Non- Destructive Eddy current Testing.  // Signals and Systems (ICSigSys), 2017 International Conference on
Bali, Indonezija: IEEE, 2017. str. - doi:10.1109/icsigsys.2017.7967036 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Anđelić, Nikola; Čanađija, Marko; Car, Zlatan
Determination of Natural Vibrations of Simply Supported Single Layer Graphene Sheet using Non-Local Kirchhoff Plate Theory.  // Proceedings of International Conference on Innovative Technologies / Pepelnjak Tomaž ; Car Zlatan ; Kudláček Jan (ur.).
Jaromer, Czech Republic: Faculty of Engineering, University of Rijeka, 2017. str. 33-36 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Zoubek, Michael; Kudláček, Jan; Kreibich, Viktor; Matas, F.; Car, Zlatan
ANTISTATIC WATER-SOLUBLE PAINTS.  // International Conference on Innovative Technologies, IN-TECH 2017 / Pepelnjak, Tomaž ; Car, Zlatan ; Kudláček, Jan (ur.).
Ljubljana, 2017. str. 271-274 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Janeš, Gordan; Car, Zlatan; Puškarić, Miroslav
MODIFIED GENETIC ALGORITHM IN CHABOCHE MODEL PARAMETERS IDENTIFICATION.  // International Conference on Innovative Technologies, IN-TECH 2017 / Pepelnjak, Tomaž ; Car, Zlatan ; Kudláček, Jan (ur.).
Ljubljana, 2017. str. 85-88 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Sokac, Mario; Željko, Santoši; Budak, Igor; Car, Zlatan; Đorđe, Vukelić
COMBINATION OF CONTACT AND OPTICAL 3D DIGITIZING METHODS FOR THEIR APPLICATION IN REVERSE ENGINEERING.  // International Conference on Innovative Technologies, IN-TECH 2017 / Pepelnjak, Tomaž ; Car, Zlatan ; Kudláček, Jan (ur.).
Ljubljana: Jaromer, Czech Republic : Faculty of Engineering, University of Rijeka, 2017. str. 65-68 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Tomić, Draško; Puškarić, Miroslav; Car, Zlatan
In silico testing of the toxicity for some anticancer herbal compounds.  // Proceedings of International Conference on Innovative Technologies / Pepelnjak Tomaž ; Car Zlatan ; Kudláček Jan (ur.).
Jaromer, Czech Republic: Faculty of Engineering, University of Rijeka, 2017. str. 217-220 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Blažević, Sebastijan; Anđelić Nikola; Car, Zlatan
Research of Unstable Behavior of Iterative Path Planning Algorithm for Robot Manipulator.  // Proceedings of International Conference on Innovative Technologies / Pepelnjak Tomaž ; Car Zlatan ; Kudláček Jan (ur.).
Jaromer, Czech Republic: Faculty of Engineering, University of Rijeka, 2017. str. 57-60 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Tomić, Draško; Car, Zlatan; Ogrizović, Dario
Running HPC applications on many million cores Cloud.  // MIPRO 2017 40th International Convention Proceedings / Skala, Karolj ; Trobec, Roman (ur.).
Opatija: Croatian Society for Information and Communication Technology, Electronics and Microelectronics - MIPRO, 2017. str. 226-231 doi:10.23919/MIPRO.2017.7973420 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Neven Bulić, Livio Šušnjić
EDDY CURRENT SENSOR SIMULATION.  // XXIV Symposium Electromagnetic Phenomena in Nonlinear Circuits
Helsinki, 2016. str. 117-118 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Anđelić, Nikola; Car, Zlatan; Braut, Sanjin; Žigulić, Roberto
Study of influence of geometry, rotational speed and heat generated by wood cutting on vibrations of circular saw blade.  // International Conference on Innovative Technologies IN-TECH 2016 / Car, Zlatan ; Kudláček, Jan (ur.).
Prag: Faculty of Engineering University of Rijeka, 2016. str. 105-109 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Blažević, Sebastijan; Braut, Sanjin; Car, Zlatan; Žigulić, Roberto
Modification on active magnetic bearings test-rig for implementing different control algorithms.  // Proceedings of International Conference on Innovative Technologies / Car, Zlatan ; Kudláček, Jan (ur.).
Prague: Faculty of Engineering University of Rijeka, 2016. str. 89-92 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Radman K., Gruber W., Bulic N.,
Geometry Optimization of a Bearingless Flux- Switching Slice Motor.  // IEMDC, IEEE International Electric Machines and Drives Conference
Coeur d'Alène, Idaho, USA, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

N. Turk , G. Šegon , N. Bulić and Z. Car
OVERVIEW OF AN OPEN SOURCE SOLUTION FOR FINITE ELEMENT METHOD ELECTROMAGNETIC SIMULATIONS.  // Proceedings of International Conference on Innovative Technologies, IN-TECH 2015,
Dubrovnik, Hrvatska, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

M. Puskaric, K. Radman, W. Gruber and N.Bulic
Magnetically suspended laboratory system.  // Procedings of International Conference on Innovative Technologies, IN-TECH 2015
Dubrovnik, Hrvatska, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

G. Šegon , N. Turk , N. Bulić and Z. Car
THEORY AND SIMULATION OF INDUCTION MACHINE BRAKING USING THE HIGH SLIP BRAKING METHOD.  // Proceedings of International Conference on Innovative Technologies, IN-TECH 2015
Dubrovnik, Hrvatska, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Volarić, Ivan; Sučić, Viktor; Car, Zlatan
A Compressive Sensing Based Method for Cross-Terms Suppression in the Time-Frequency Plane.  // Bioinformatics and Bioengineering (BIBE), 2015 IEEE 15th International Conference on
Beograd, Srbija, 2015. str. 383-386 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Milanović, Željka; Marasović, Ivan; Saulig, Nicoletta; Car, Zlatan
Analysis of Corkscrew Electrode Failure Origins.  // Proceedings of International Conference on Innovative Technologies (IN-TECH 2015)
Dubrovnik, Hrvatska, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Malnar, Damir; Sučić, Viktor; Car, Zlatan
Optimizing the Reference Signal in the Cross Wigner-ville Distribution Based Instantaneous Frequency Estimation Method.  // Procedia Engineering / Katalinic, Branko (ur.).
Beč: Elsevier Ltd., 2015. str. 1657-1664 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Radman, K., Gruber, W., Bulić, N.
Loss Analysis of a Bearingless Flux-Switching Slice Motor.  // Proc. 14th Int. Symp. on Magnetic Bearings (ISMB), 2014
Linz, Austrija, 2014. str. 2010-2015 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Radman, K., Gruber, W., Bulić, N.
Performance Evaluation of a Bearingless Flux- Switching Slice Motor.  // Proc. 6th IEEE Energy Conversion Congress and Exposition (ECCE), 2014
Pittsburgh, PA, USA, 2014. str. 3811-3818 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Radman, K., Gruber, W., Bulić, N.
Control Design of a Bearingless Flux-Switching Slice Drive.  // Proc. European Embedded Design in Education and Research Conference (EDERC), 2014
Milano, Italy: Texas Instruments, 2014. str. 197-201 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

G. Janes, Z. Car, D. Ogrizovic
Accelerators on parallel roads to exascale computing.  // Proceedings of International Conference on I nnovative Technologies / Zlatan Car, Jan Kudláček, João Rafael (ur.).
Prag,: Faculty of Engineering University of Rijeka, 2014. str. 333-337 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Leon Šikulec, Mate Torlak, Zlatan Car
The development, implementation and comparison of models of industrial robot using Modelica modeling language.  // Proceedings of International Conference on Innovative Technologies / Zlatan Car, Jan Kudláček, João Rafael (ur.).
Prag,: Faculty of Engineering University of Rijeka, 2014. str. 329-333 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Neven Bulic; Peter Dirnberger; Sigfried Silber
New Sensor Design for Rotor Displacement Measurement Based on the Coupled Oscillators Theory.  // 1st Brazilian Workshop on Magnetic Bearings
Rio de Janeiro, 2013. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Ogrizović, Dario; Car, Zlatan; Janeš, Gordan; Kovačić, Božidar
Doing Science in the Cloud.  // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.).
Rijeka: Faculty of Engineering University of Rijeka, 2013. str. 385-388 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Janeš, Gordan; Car, Zlatan; Ogrizović, Dario
A Fast Genetic Algorithm Based on Single Gene Evaluation Fitness Mechanism for Job-Shop Scheduling Problem.  // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.).
Rijeka: Faculty of Engineering University of Rijeka, 2013. str. 345-348 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Plančak, Miroslav; Movrin, Dejan; Car, Zlatan; Durakbasa N.; Vilotić, Dragiša
Orbital Forging of Cross Joint Component.  // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.).
Rijeka: Faculty of Engineering University of Rijeka, 2013. str. 265-268 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Zoubek, M.; Kudláček, Jan; Drašnar, Petr; Herrmann, F.; Valeš, M.; Car, Zlatan
The New Wear-Resistant Coating Systems Containing Carbon Nanotubes.  // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.).
Rijeka: Faculty of Engineering University of Rijeka, 2013. str. 173-176 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Kršulja, Marko; Štefančić, Mauro; Car, Zlatan; Pepelnjak, Tomaž; Plančak, Miroslav; Vojkovský, Karel
Finite Analysis of Deep Drawing Tool Geometry for Thin Walled Tin Can.  // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.).
Rijeka: Faculty of Engineering University of Rijeka, 2013. str. 401-404. (https://www.bib.irb.hr/641978) (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Šikulec, Leon; Perčić, Katja; Plančak, Miroslav; Car, Zlatan; Kačmarčik, Igor; Štrbac, Branko
Analyzing Anomalies of Injection Tooling Mold Design.  // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.).
Rijeka: Faculty of Engineering University of Rijeka, 2013. str. 425-428 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Bulić, Neven; Dirnberger, Peter; Silber, Sigfried
NEW DIGITAL SENSOR DESIGN FOR ROTOR DISPLACEMENT MEASUREMENT BASED ON THE COUPLED OSCILLATORS.  // EDERC2012: 5th European DSP Education and Research Conference Proceedings
Amsterdam, Nizozemska: Texas Instruments, 2012. str. 247-251 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Štimac, Goranka; Braut, Sanjin; Bulić, Neven; Žigulić, Roberto
Modeling and experimental verification of a flexible rotor supported by active magnetic bearings.  // Proceedings of the XXII Symposium Electromagnetic Phenomena in Nonlinear Circuits
Pula: University of Rijeka, PTETIS Publishers, 2012. str. 117-118 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Bulić, Neven; Dirnberger, Peter; Silber, Sigfried
NEW APPROACH FOR ROTOR DISPLACEMENT MEASUREMENT IN BEARING LESS MOTORS.  // XXII Symposium Electromagnetic Phenomena in Nonlinear Circuits Proceedings
Rijeka: PTETiS, 2012. str. 25-26 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Bulic, Neven; Sumina, Damir; Car, Zlatan
DSP-based control system for excitation control of synchronous generator.  // Proceedings of International Conference on Innovative Technologies IN-TECH / Zlatan Car, Jan Kudláček, Tomaž Pepelnjak (ur.).
Rijeka: Faculty of Engineering University of Rijeka, 2012. str. 567-570 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Drasnar, Petr: Kudláček, Jan; Roskanin, Petr; Pepelnjak, Tomaž; Car, Zlatan; Vales, M.
Introduction of New Surface Treatment Technologies Into Practice - Zinc Based Composite Coating with PTFE Particles (Zn-PTFE Coating).  // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.).
Rijeka: Faculty of Engineering University of Rijeka, 2012. str. 339-342 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Kršulja, Marko; Barišić, Branimir.; Pomenić, Loreta; Car, Zlatan; Šikulec, Leon.
Thin Metal Material TH 415 Composition Testing.  // 13th International Scientific Conference Automation in Production Planning and Manufacturing / Kuric, Ivan (ur.).
Žilina: Scientific and Technical Society at the University of Žilina, 2012. str. 133-139. (https://www.bib.irb.hr/587961) (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Plančak, Miroslav; Movrin, Dejan; Car, Zlatan; Dragiša Vilotić; Kacmarcik, Igor; Kršulja, Marko
BI-Metallic Cold Backward Extrusion – Numerical Simulation with Experimental Verification.  // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.).
Rijeka: Faculty of Engineering University of Rijeka, 2012. str. 417-420. (https://www.bib.irb.hr/597528) (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Kršulja, Marko; , Roškanin, Petr; Kudláček, Jan; Pomenić, Loreta; Car, Zlatan
Investigation of Coatings Friction Coefficient Used in Production of Deep Drawn Packaging Cans.  // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.).
Rijeka: Faculty of Engineering University of Rijeka, 2012. str. 443-446. (https://www.bib.irb.hr/597531) (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Kršulja, Marko; Kuzman; Karl; Plančak, Miroslav; Math Miljenko; Car, Zlatan
Investigation of Single Point Incremental Forming Process Applied on Thin Sheet Metal.  // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.).
Rijeka: Faculty of Engineering University of Rijeka, 2012. str. 583-586. (https://www.bib.irb.hr/599508) (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Plančak, Miroslav; Vilotić, Dragiša; Car, Zlatan; Movrin, Dejan; Kačmarcik, Igor; Kršulja, Marko
Forward Extrusion of Bi-metallic Components.  // Proceedings of 4th International Scientific and Expert Conference of the International TEAM Society / Marija Živić ; Tomislav Galeta (ur.).
Grafika d.o.o., Osijek: Mechanical Engineering Faculty in Slavonski Brod, Josip Juraj Strossmayer University of Osijek and International TEAM Society, 2012, 2012. str. 125-128 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Jurjević, Marin; Kršulja, Marko; Katalinić, Branko; Car, Zlatan; Šikulec, Leon
Automatic Measurement of Rotational Speeds and Lathe Maintenance.  // Annals of DAAAM for 2012. & Proceedings of the 23rd International DAAAM Symposium / Katalinic, Branko (ur.).
Vienna: DAAAM International, 2012. str. 775-778. (https://www.bib.irb.hr/602459) (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Radelja, Hrvoje; Kršulja, Marko; Šikulec, Leon; Car, Zlatan
Measurements Data Analysis and Defect Classification Using NN.  // Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.).
Prag: Tisk AS, s.r.o., Jaroměř, 2011. str. 770-772 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Zenzerović, Paolo; Car, Zlatan
Vehicle Beam Light Assistant System.  // Annals of DAAAM for 2011 & PROCEEDINGS of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Vienna: DAAAM International Vienna, 2011. str. 1653-1654 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Hodak, Marko; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan
Flatness of Mechanical Interface of Housing Filter: Comparing Methods.  // Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Vienna: DAAAM International, 2011. str. 1381-1382. (https://www.bib.irb.hr/545405) (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Jurjević, Marin; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan
Suitable Devices for Measuring Roughness on Oil Filter Housing.  // Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Vienna: DAAAM International, 2011. str. 1351-1352 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Despot, Veselka; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan; 
Radioscopic measurement on fuel filter support: inspection for health of material.  // Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Vienna: DAAAM International, 2011. str. 1359-1360. (https://www.bib.irb.hr/544960) (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Zlatan Car
Relationship between University and Industry: partners in education and business.  // 2nd Regional Conference “Supercomputing Applications in Science and Industry” / Stanislav Markov (ur.).
Sofia, Bulgaria, 2011. str. 50-55 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo)

 

Bogović, Iva-Nicol; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan
Digitizing system ATOS - measuring turbo compressor housing.  // Annals of DAAAM for 2011 & Procedingd of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Vienna: DAAAM International, 2011. str. 1367-1368. (https://www.bib.irb.hr/544943) (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Kršulja, Marko; Cukor, Goran; Car, Zlatan
Simulation of Product Logistic, Investigation of Facility Layout Capabilities.  // International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.).
Prag: Tisk AS, s.r.o., Jaroměř, 2011. str. 759-761. (https://www.bib.irb.hr/529974) (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Drasnar, Petr; Kudlaček, Jan; Kreibich, Viktor; Roskanin, Petr; Pakosta, Michal; Vales, Miroslav; Car, Zlatan
The Tribological Properties of Zn-PTFE Composite Coating.  // International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.).
Prag: Tisk AS, s.r.o., Jaroměř, 2011. str. 142-146 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Lazanja, Matej; Barišić, Branimir; Car, Zlatan
Considerations on the use of Ballbar System in Accuracy Assessment of the Triaxial CNC Machine Tool.  // International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.).
Prag: Tisk AS, s.r.o., Jaroměř, 2011. str. 762-764 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Barišić, Branimir; Miroslav, Plančak; Car, Zlatan
Analysis of Nonhomogeneous Yielding by Means of Different Intelligent System Based on Stochastic and Finite Element Method.  // Proceeding of The 14th Asia Pacific Symposium on Intelligent and Evolutionary Systems / Ohkura, Kazuhiro (ur.).
Hiroshima: Hiroshima University, 2010. str. 326-334 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Car, Zlatan; Dario, Ogrizović; Branimir, Barišić, Katalinić, Branko
Introduction of Scientific Cloud Concept for Industry Application.  // 14th Asia Pacific Symposium on Intelligent and Evolutionary Systems : proceedings / Ohkura, Kazuhiro (ur.).
Hiroshima: Hiroshima University, 2010. str. 213-220 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Sumina, Damir; Bulić, Neven; Erceg, Gorislav
Excitation control of a synchronous generator using neural networks.  // EDPE 2009 Proceedings
Dubrovnik, Hrvatska, 2009. str. 1-5 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Car, Zlatan; Barišić, Branimir; Kršulja, Marko
Creating Virtual Models of Production Equipment For Simulation of a Manufacturing Process System.  // 10th International Scientific Conference, Automation in Production Planning and Manufacturing / Kuric, Ivan (ur.).
Žilina: University of Žilina, Faculty of Mechanical Engineering, 2009. str. 38-44 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Sumina, Damir; Bulic, Neven; Erceg, Gorislav
SIMULATION MODEL OF NEURAL NETWORK BASED SYNCHRONOUS GENERATOR EXCITATION CONTROL.  // EPE-PEMC 2008 Proceedings
Poznan, 2008. str. 571-575 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Car, Zlatan; Barišić, Branimir; Sladic, Saša
GA Based Design and Production Planing.  // Proceedings of the 9th International Scientific Conference ” New Ways in Manufacturing Technologies” / Karol Vasilko (ur.).
Prešov: Technical University Kosiciach, 2008. str. 15-19 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Kršulja, Marko; Barišić, Branimir; Car, Zlatan
Considerations and Use of the Genetic Algorithm in Optimization of Standard Fixture Components.  // The 19th International DAAAM SYMPOSIUM "Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions" / Katalinić, Branko (ur.).
Vienna: DAAAM International Vienna, 2008. str. 731-732 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Sladić, Saša; Car, Zlatan; Barišić, Branimir
Evolutionary Based Production Planning.  // Proceedings of 9th International Scientific Conference "Automation in Production Planning and Manufacturing" / Ivan Kuric (ur.).
Zilina: University of Zilina, 2008. str. 252-258 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Bulić, Neven; Sumina, Damir; Šimić, Toni
Neural Network Based Synchronous Generator Excitation Control.  // EDPE 2007 Proceedings
Košice, 2007. str. 1-6 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Bulic, Neven; Krasser, Edwin; Erceg, Igor
Neural Network Based Excitation Control of Synchronous Generator.  // IEEE Region 8 Eurocon 2007 Proceedings
Warsaw: IEEE Region 8, 2007. str. 1935-1941 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Dusevic, Hrvoje: Car, Zlatan: Barišić, Branimir
Machining Center Efficiency Optimization Using Artificial Intelligence.  // Annals of DAAAM for 2007 & Proceedings of the 18th International DAAAM Symposium / B. Katalinic (ur.).
Vienna, Austria: DAAAM International, 2007. str. 132-133 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Barišić, Branimir; Car, Zlatan; Kuzman, Karl
Evaluation of Different Analytic Models Accuracy at Backward Extrusion Force on AlCu5PbBi.  // Proceedings of the 12th International Conference On Tools ICT-2007 / Dudas Illes, Szabo Otto, Varga Gyula (ur.).
Mišlolc: Department of Production Engineering-University of Miskolc, 2007. str. 287-293 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Barišić, Branimir; Car, Zlatan; Nastran Miha
Numerical Strategy for Ust 13 Sheet Metal DVD Holder Production.  // 6th International Conference on Industrial Tools and Materials Processing Technologies / Kuzman, Karl (ur.).
Celje: TECOS, 2007. str. 337-343 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Car, Zlatan; Barišić, Branimir; Math, Miljenko Dino
Modeling And Simulation Of Tinplate Container Lids Stamping Process.  // Trends in the Development of Machinery and Associated Technology / Ekinović, S. ; Vivancos, J. ; Yalcin, S. (ur.).
Barcelona-Lloret de Mar: Escola Tecnica Superior D Enginyeria Industrial de Barcelona ; Faculty of Mechanical Engineering in Zenica ; Bahcesehir University Istanbul, 2006. str. 173-176 (poster, cjeloviti rad (in extenso), znanstveni)

 

Blažević, Dalibor; Mikac, Tonči; Car, Zlatan
MES System Data Acquisition in Rolling Mill Plant Automation.  // Proceedings of the 5th DAAAM International Conference on Advanced Technologies for Developing Countries / Mikac, T. ; Katalinić, B (ur.).
Rijeka: University of Rijeka-Faculty of Engineering, 2006. str. 287-290 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Haračić, Senad; Barišić, Branimir; Car, Zlatan
3D Measurements And Analysis Of Measuring Results For The Optical Eyepiece Holder.  // TPP 2006-Technological Process Planning / Legutko, S (ur.).
Poznan: Comitee of the Mechanical Engineering, Polish Academy of Science-Division Poznan, 2006. str. 111-117 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Ikonić, Milan; Car, Zlatan; Barišić, Branimir
Modern Organizational Concepts and Methods of Production Management.  // Proceedings of the 5th DAAAM International Conference on Advanced Technologies for Developing Countries : ATDC 2006 / Mikac, Tonči ; Katalinić, Branko (ur.).
Rijeka ; Vienna: University of Rijeka, Faculty of Engineering ; DAAAM, 2006. str. 291-297 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Barišić, Branimir; Kršulja, Marko; Car, Zlatan
Preliminary GA Based Optimization In Process Of Jig Design For Milling Processes.  // Proceedings of the 17th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Mechatronics & Robotics" / Katalinic, B. (ur.).
Vienna: DAAAM International Vienna, 2006. str. 029-030 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Crljenko, Domagoj; Barišić, Branimir; Car, Zlatan
Optimization Of Tool Motion On A 2-Dimensional Surface By Means Of The Genetic Algorithm.  // Proceedings of the 5th International DAAAM Conference Advanced Technologies for Developing Countries-ATDC 2006 / Mikac, T. ; Katalinić, B (ur.).
Rijeka: University of Rijeka-Faculty of Engineering, DAAAM International Vienna, 2006. str. 159-164 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Maričić, Sven; Barišić, Branimir; Car, Zlatan
Stochastic Algorithm Application In Project Management For Limited Series Production.  // Proceedings of the 5th International DAAAM Conference "Advanced Technologies for Developing Countries" (ATDC 2006) / Mikac, T. ; Katalinić, Branko (ur.).
Rijeka: University of Rijeka, Faculty of Engineering, 2006. str. 281-286 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Ikonić, Milan; Mikac, Tonči; Car, Zlatan
New Method of Choosing the Optimal Organization Structure.  // Proceedings of 6th International Workshop on Emergent Synthesis : IWES ´06 / Ueda, Kanji (ur.).
Tokyo: The University of Tokyo, 2006. str. 25-34 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Car, Zlatan; Mikac, Tonči; Veža, Ivica
Utilization of GA for Optimization of Tool Path on a 2D Surface.  // Proceedings of the 6th International Workshop on Emergent Synthesis / Ueda, Kanji (ur.).
Tokyo: The University of Tokyo, 2006. str. 231-236. (https://www.bib.irb.hr/254464) (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Bulić, Neven; Miletić Marinko; Erceg Igor
DSP BASED SYSTEM FOR SYNCHRONOUS GENERATOR EXCITATION CONTROLL.  // EDPE 2005
Dubrovnik, Hrvatska, 2005. str. 1-5 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Barišić, Branimir; Car, Zlatan; Mikac, Tonči, Ikonić, Milan
Computer Simulation of Hollow Tinplate Part Manufacturing.  // Proceedings of 6th International Scientific-Technical Conference Automation and CA Systems in Technology Planning and in Manufacturing / Novak-Marcincin, Josef (ur.).
Herlany: TU Košice, 2005. str. 16-20 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Car, Zlatan; Mikac, Tonči
Multi-Agent Manufacturing System Design Based on Emergent Synthesis Approach.  // AMST'05 Advanced Manufacturing Systems and Technology: Proceedings of the Seventh International Conference / Kuljanić, Elso (ur.).
Udine: Springer-Verlag, 2005. str. 307-316 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Bulić, Neven; Erceg, Gorislav; Idžotić, Tomislav
Comparison of different methods of excitation control for a synchronous generator.  // EPE-PEMC Riga 2004
Riga, Letonija, 2004. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Sumina, Damir; Bulić, Neven; Erceg, Gorislav
Implementation of an industrial drive control system in education process.  // EPE 2003 - Toulouse
Toulouse, Francuska, 2003. str. 1-7. (https://www.bib.irb.hr/161751) (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Bulić, Neven; Sumina, Damir; Erceg, Gorislav
Laboratory use of an industrial drive control system.  // EDPE-03
Košice, Slovačka, 2003. str. 359-363. (https://www.bib.irb.hr/177261) (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

Car, Zlatan; Hatono, Itsuo; Ueda, Kanji
Multi-objective Design and Adaptable Reconfiguration of the Manufacturing System Shop-floor.  // Progres in Virtual Manufacturing Systems, Proceedings of The 36th CIRP International Seminar on Manufacturing Systems / Prof. Dr.-Ing. Helmut Bley (ur.).
Saarbrucken: Published by CIRP ISMS, 2003. str. 493-500 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

 

@ Nikola Lopac 2020.